A blocked drain is usually the main channel or tube for unwanted waste liquid or water to be diverted to an alternate area, funnelled into a different receptacle, or flow into sewers and stormwater pipes as sewage discharge is removed or processed. This wastewater will contain bacteria, which can cause foul odours and unpleasant smells in your home. It can also cause damage to your plumbing system by blocking the flow of water and causing clogs in the pipes. Therefore, blocked drains must be repaired or restored as soon as possible. So how to unclog a blocked drain?
Distinct-Plumbing Blocked Drains Adelaide Can Be Repaired or Resolved by a Plumber Blocked drains are often caused by heavy rain or even ice on the pipes. If this is the case, heavy rain can cause cracks in the pipe and cause blockage. Heavy rain also puts a lot of pressure on the pipes and can cause them to burst or even break. If you have a faulty drainage system, it is likely to burst, and you need to repair or resolve blocked drains as soon as possible.
How to Unclog Blocked Drains If you face a problem with blocked drains, then the first thing you need to do is identify where it is coming from. You may find that the problem is outside drains, and it is because outside drains sometimes get blocked due to accumulated leaves, dust, or other debris inside them. You can quickly solve this kind of blockage by using some parts of an onion. First, cut a slice from the onion and remove the bulb from it. Now, insert the bulb into the drain and make sure the onion completely covers it.
Another common cause of blocked drains is grease. Grease and oil accumulate in pipes because of the excess water inside them. Unfortunately, there is no way for you to avoid the accumulation of grease and oil inside pipes because of the natural process that waste materials go through in the pipes. However, you can keep grease and oil out of your house if you can find the source of the grease or oil and clean it properly. One effective way of doing this is using a grease remover.
If you wonder how to fix blocked drains from the outside, you can use some baking soda. First, mix a few tablespoons of baking soda with some hot water and pour it into a basin. Now, place the basin over the drain pipe and let it sit there for about five minutes. The baking soda will dissolve the grease on the drain pipes and will help unclog them for you. When you think that the baking soda has completely dissolved the grease, remove it and clean the drain with water and soap.
How to fix blocked drains from the inside? It is a little bit harder than the outside solution. You can use a plunger, but you should be careful when using a plunger because you can break some pipes if you do not know how to use it properly. A broken pipe can cause severe damage to your home and your health. In addition to that, you can risk dealing with various health hazards if you expose yourself to tree roots.
To learn how to fix blocked drains, you have first to know why the blockage occurs in the first place. Heavy rain is one of the leading causes of blocked drains in most homes. Aside from the fact that it is costly to replace the pipes damaged during heavy rain, broken pipes are also dangerous because they are more susceptible to becoming damaged again. Tree roots are attracted to wet and warm surfaces, so you can expect your blocked drain to get even worse during heavy rain. If you leave a greasy build-up of grease and grime on your pipes, it can start to expand until the entire pipe becomes completely clogged.